The Porsche 924 Owners Club
http://porsche924.co.uk/forum/

Body cuts for '79 project?
http://porsche924.co.uk/forum/viewtopic.php?f=13&t=34604
Page 1 of 1

Author:  doctor924 [ Sat May 16, 2020 10:50 am ]
Post subject:  Body cuts for '79 project?

Well, after a long absence I am finally back owning a rather beaten up 924. It has history in the group (https://porsche924.co.uk/forum/viewtopi ... 4&start=20) - and needs quite a bit of work. Usual bad areas of the battery tray area had been awfully fibreglassed and removing it revealed a gaping hole about 4 inches across. As a result the passenger floor has a hole about 8 inches long by 5 inches wide caused by probably years of water dripping down inside the bulkhead. The sills need some attention too and I found another hole in the drivers side floor. I expect some work too on the inner wings at the bottom of the front wings. The lat MOT expired in May 2019 and i have no idea how it passed then.

So I wondered if anyone had or could take cuts for me from a breaker? The battery area and passenger floor in particular?

Thanks
Ian

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/